Flat and low-slope roof leaks
Ponding, seams and parapet flashing
Drip edge is the L-shaped metal at the eaves and rakes that throws water clear of the fascia and into the gutter. Without it, water tracks back along the underside of the shingle edge and runs down the fascia board, which is the single most common reason fascia rots. It is inexpensive, it is required by most current codes, and it is routinely missing on older roofs — so it is worth checking whenever fascia or gutter work is being done.
Waco sits in the Blue Ridge foothills, which puts it in a different roofing climate from most of Georgia. The mountains get real freeze-thaw cycling: water works into a hairline gap in flashing during the day, freezes overnight, expands, and opens the gap a little wider. Repeat that through a Haralson County winter and a joint that was watertight in October is leaking by March. Ice at the eaves is the other one — meltwater running down a warm roof refreezes over the cold overhang and backs up under the shingle course, which is how water ends up inside a roof with no visible damage at all. Steep pitches shed snow well but make access harder, and older stock here runs to standing-seam and pressed metal, which fails at the fastener rather than the panel.
Waco has a population of about 536, and the housing stock here sets the pattern for what fails first on a roof.
It is why the fascia rots. Water clings to the underside of the shingle edge and tracks back onto the timber instead of dropping into the gutter. Retrofitting it is cheap compared with replacing fascia repeatedly.
At the eaves it can often be slid under the first shingle course. At the rakes it needs to go under the underlayment, which usually means lifting the edge courses. Both are localised jobs.
Ponding, seams and parapet flashing
The capping along the roof peak
Missing, cracked or lifted shingles
Vinyl, fiber cement and wood
Replacing a failed roof window
Scheduled checks instead of emergencies
You will get a straight answer on whether Waco needs someone out today or whether it can wait — before anyone quotes you for anything.
Call (229) 592-0097